OrchEd Logo
 
 
 
 
Hydrogen Production (Page 1 of 3)  


Procedure Part 1:

First we prepare the bottles and electrodes.

  Materials / Part 2 / Part 3 / Main Page

 

 

Step 1:

  • Cut the top off of the 2 liter plastic pop bottle.
  • Cut the bottoms off of the 20 oz. plastic pop bottles so they both enter completely inside 2 liter bottle.

 

 

Step 2:

  • Carefully cut the wooden case away from the carpenter pencil without cutting into the carbon graphite lead.
  • Break the lead in half.

 


Electronics Experiments Procedure

 

Step 3:

  • Using two 1ft lengths of telephone wire, remove ¼” insulation on one end and approximately 2” from the other end.
  • Tightly wrap the bare copper 2” end around one end of each of the carbon graphite electrodes. Encapsulate with hot glue.


Electronics Experiments Procedure

 
 
P.O. Box 459, Huntsville, Utah 84317-9724
Copyright 2004-2005 Orchid Educational Enterprises Inc.All rights reserved